Rotational & Lateral Compensation
RAD's Spring-Loaded Compliance Device offers ± 5º of rotation and ± 0.10" (2.54mm) lateral movement to compensate for misalignments within the production process.

Compliance
The Spring-Loaded Compliance Device can be used for smooth compliance with set resistance.

Moderate Insertion Force
RAD's Spring-Loaded Compliance Device is ideal for applications requiring moderate insertion forces since it offers no compression in the "Z" axis and low lateral resistance.

Positive Stops
RAD's Spring-Loaded Compliance Device offers positive stops to protect against overload in any direction.

Durability
RAD's Spring-Loaded Compliance Device was designed with durability in mind. The body is constructed of black anodized aluminum; heavy-duty bearings on hardened surfaces minimize wear, and hardened ground rings offer long life and wear resistance to the unit. Spring-loaded pistons are used to create the force resistance offering greater durability than the elastomers used in most compliance devices.

No Maintenance Required
RAD's Spring-Loaded Compliance Device is pre-adjusted at the factory and normally requires no maintenance.

Repairability
Should a repair be necessary, most components of RAD's Spring-Loaded Compliance Device can be replaced or repaired in the field to minimize downtime.

NOTE: Can also be used on linear actuators, pick & place machines, and other automated equipment.